KWS 1920 DOOR HOLDER WITH HOOK ON POST
In combination with KWS 1011 door holder. Mounting: Floor mounting.
| Category: Door holders |
| Mounting method: Floor mounting |
| Max. door/gate weight (kg): 100 |
| Material: Galvanised steel, Stainless steel / Inox |
| Height door holder/door buffer (X) (mm): Min. 50 mm smaller than H, recommended height max. 300 mm (X) |
OPTIONS AVAILABLE
KWS 1920 Door holder with hook on Post
With KWS 1011 DOOR HOLDER
Post and roller block to be screwed
Suitable for use in combination with a door closer
Height post (H) - Standard height 1.000 mm, recommended height max. 1.100 mm
Height door holder (X) - Must be at least 50 mm shorter than dimension H, recommended height max. 300 mm
Made to order, therefore delivery time is ± 3 weeks
MATERIAL
Galvanised steel / Stainless steel
MODE OF OPERATION
Foot/hand actuation
DOOR WEIGHT
Max. 100 kg
FUNCTION
To hold the door in place, push it against the holder until the hook is engaged on the roller block. Actuating the hook while simultaneously pressing the door against the holder disengages the holding mode.
The lever, switched from position A to B, deactivates the holding mode: In this case, the door holder only has the function of a spring-loaded door buffer.
INSTALLATION
Mount the post on the floor with three screws at the desired arresting point, which should be the furthest possible distance from the door hinge. Fix the roller block to the door at the corresponding position.
REPLACEMENT PARTS